Removal and install of engine assembly.

• $1,200 labor

Complete front end reseal with all crank shaft seals, counter balance seals, and camshaft seals to also include the flanges and updated oil pump drive.

• $600 labor

• $340 parts

Front and end counter balance housings will be inspected and resealed.

Bearings replaced if necessary.

• $350 labor

• $157 parts (add cost if replacing bearings)

Housing will be resealed, oil cooler pressure tested for leaks, and an updated oil pressure relief valve installed.

• $375 labor

• $327 parts

Removed, disassembled, cleaned, and resealed.

• $300 labor

The oil pan will be removed, cleaned and re-sealed with new seal and hardware.

• $400 labor

Optional:

Service to include genuine Porsche rod bearings and nuts.

• $300 labor

• $384 parts

Rebuilt with new seals, cam gear bolt, all lifters checked, camshaft measured, and new housing bolts installed with gaskets.

• $275 labor

• $305 parts

Replaced with all new rollers, tensioners and hardware.

• $375 labor

• $305 parts

Includes new Geba water pump with belt guard, updated rollers and hardware. New thermostat and block off plate with O ring installed.

• $150 labor

• $500 parts

Smoke tested and installed with new O rings.

• $22 parts

Replaced.

• $75 labor

• $27 parts

Replaced with large Porsche oil filter and 20w-50 Driven Racing oil.

• $100 labor

• $110 parts

Block and hardware all thoroughly cleaned and/or replaced if needed.

• $300 labor

• Varied parts cost if needed.

Install all new silicon hoses underneath the intake manifold, including all vacuum fittings and lines; Clean intake manifold, install new gaskets and hardware. Clean and test auxiliary air valve or idle air control valve depending on the year.

• $600 labor

• $309 parts

Engine mounts and new hardware installed with engine removed.

Options:

• Genuine Porsche

  • $150 labor

  • $900 parts

• Hamburg Technic

  • $150 labor

  • $150 parts

Install all new intake and return lines at engine.

• $150 labor

• $100 parts

Drain old fuel from tank, install new intake fuel strainer.

• $150 labor

• $120 parts

New fuel pump with feed hose.

• $150 labor

• $235 parts

New fuel line from pump to fuel filter, new fuel filter, and new fuel line from filter to body.

• $225 labor

• $380 parts

Optional:

Install new fuel damper and regulator.

• $150 labor

• $398 parts

Later model 944’s have an extra 90 degree fuel line on the fuel rail.

• Add $245

Install new/completely rebuilt fuel injectors with seals and filters.

• $400 parts

Now is a great time to rebuild your torque tube as the bearings are now close to forty years old. While the engine is out, we remove torque tube, clean and paint the outer housing and install 4 new bearings.

• $1200 labor

• $450 parts

Clutch, pressure plate, release bearing, clutch fork, pin, guide sleeve, pressure plate bolts, flywheel bolts, pilot bearing and crank seal to be replaced. We will also have the flywheel resurfaced.

• $300 labor

• $1200 parts

Optional:

Replace clutch master and slave cylinder with hoses.

• $150 labor

• $280 parts

The front and rear shocks will be replaced along with bump stops and dust boots. This includes a thorough cleaning, sandblasting and repainting the housings with a steel-it coating. New mounting bolts and eccentrics to be installed.

Price varies on suspension options.

• Sachs option

  • $525 labor

  • $600 parts

Front control arm rebuild to include to include ball joints, bushings, and rear mounts.

• Early steel arm

  • $300 labor

  • $250 parts

• Late aluminum arm

  • $300 labor

  • $838 parts

Optional:

Front and rear sway bar bushings and end link replacement.

• $300 labor

• $300 parts.

Rebuild and install includes cleaning calipers, zinc plating or steel it coating, new pistons, seals and hardware.

• $300 labor

• $850 parts

New Textar pads and drilled Zimmerman rotors with hardware kit-front and rear.

• $150 labor

• $850 parts

Front wheel bearings, includes cleaning and media blasting hubs.

• $300 labor

• $80 parts

New brake hoses—front and rear.

• Stainless

  • $225 labor

  • $95 parts

• Factory rubber

  • $225 labor

  • $75 parts

Brake fluid flush with DOT 4.

• $150 labor

• $25 parts

Optional:

Install new brake master cylinder

• $150 labor

• $170 parts

Brake Booster

• $375 labor

• $330 parts

If needed we will replace all cooling hoses, including the hoses to the heater core and replace the heater vacuum valve.

• $300 Labor (for an early car add $150 labor)

• $220 parts

Install a new coolant reservoir and vacuum fill the entire system with new coolant.

• Genuine Porsche

  • $150 labor

  • $380 parts

Install a new coolant reservoir and vacuum fill the entire system with new coolant.

• Genuine Porsche

  • $150 labor

  • $380 parts

• Aftermarket

  • $300 labor

  • $233 parts

Optional:

Upgrading radiator to a CSF aluminum housing with dual electric fans.

• $300 labor

• $1100 parts

Install new GNK axles with bolts

• $300 labor

• $600 parts

Drain and fill transaxle with new 75w-90 gear oil

• $100 labor

• $75 parts

Optional but highly recommended due to the age of these cars, labor cost listed is with the engine removed.

Technica Racewire engine harness

• Early 944

  • $300 labor

  • $1,515 parts

• Late 944

  • $300 labor

  • $1,615 parts

Technica Racewire alternator harness (early and late cars)

• $75 labor

• $150

Technica Racewire battery harness

• $75 labor

• $250 parts (with Moroso battery terminals add $80)

Contact us for information about lift kits.

Lower rear shock mounts and hardware

• $240 parts

Energy suspension dampers with spacers and hardware.

• $150 labor

• $300 parts

Front subframe and control arm spacers with extended hardware

• $150 labor

• $150 parts

BF Goodrich 215/75/15 KO2 tires set of 4

• $1,000 mounted and balanced

Front runner roof rack

• $300 labor

• $1200 parts

• For late model 944 add $300 for drip rail backdate

Roof rack lights

• $300 labor to mount lights to roof rack

• Parts cost varies on brand of lights chosen

Custom Technica Racewire waterproof light harness with switches

• $300 labor

• $700 parts